KS – Vertical type vacuum
chain cutter
Sucks in thread chain by vacuum pressure and cuts it.
The suction inlet is positioned by the needle and vertically
to the cloth plate.
KH – Flat type vacuum
chain cutter
Sucks in thread chain by vacuum pressure
and cuts it. The suction inlet positioned right behind
the presser foot and flush with the cloth plate. Can cut
and suck in wide thread chains of safety stitch machines
or 2-needle overedgers, extra-heavy and woolen yarn thead
chains.
AT – Automatic tape cutter
The sensor detects the fabric edge of automatically lower
the knife and cut tape and thread chain to be sucked.
The lengths of the leading and trailing thread chain and
tape can be changed correctly by the stitch counter to
be free from operator-related factors.
TK – Tape cutter
With its switch-operated knife that can be lowered to
cut tape and thread chain. The finger switch and knee
switch are available. Either pneumatically-driven or electrically-driven
switch can be selected.
EH – Electric hemming device
Prevents fabric misalignment which tends to occure in
the cross seam sections of blindstitch hemming oprations.
The sensor detects the cross seam sections to automatically
slide the hemming guide and keep the fabric from misaligning.
Operators concentrate on their operations.
PL – Presser foot lift
Pneumatically-operated presser foot lift. The presser
foot can be lifted with heel treadle. Ease of operation
decreases operators fatigue.
|
|
BT –
Backlatcher
Backlatches the thread chain by sewing it back into the fabric
at the start of sewing. Plain seaming and backlatching are combined
into one, saving time and thus increasing productivity.
AL – Auto-labeller
Microprocessor-controlled, automatic label setting eliminates
the tedious and timeconsuming job of manually setting labels,
thus increasing efficiency. Makes it possible to pre-program
various parameters up to 9(label size, label position, etc.)
as desired.
BF – Forcibly driven top feed belt
Feeds the top ply of the material positively by means of the
belt, providing very efficient and uniform seing operations
on slippery fabrics or fabrics whichplyshift tends to occure.
Also adopts the type that can be used for simultaneous operations
of attaching rib knit collars and tapes to the necks of polo
shirts and similaar garmentas, thereby simplifying the operaton.
SD – Fabric misalignment alarm
Equipped with the sensor to detect the plyshift which tends
to occur in operations of joning defferently shaped top and
bottom parts and alerts the operator with the buzzer and lamp.
The operator can find rejects more easily, decreasing the number
of inspectors required and thus increasing production.
LC – Pneumatically-operated lint collector
Powerfully collects thread chains and cutting waste by compressed
air. The waste is sucked into an easy-to-handle collector bag.
This collector is compact, so it saves space in the factory.
|
