Arch Sewing Machine Co. Supplying the world for over 50 years!
About Arch Sewing New Machines Used/Rebuilt Machines Parts & Accessories Specials Order Form Get Quote Contact Home
New Sewing Machines

AMS-210D [Sewing area: 60mm(L) x 130mm(W)]

Computer-controlled Cycle Machine with Input Function

back to main JUKI page

The design of the AMS-210D has been completely reworked to realize a machine that's "faster, easier to operate, and even better looking than before." The machine provides upgraded functions and performance that go beyond the conventional standard. JUKI proudly presents the AMS-210D a machine guaranteed to satisfy users through its improved productivity, seam quality, and operability.


The machine finishes high-quality seams on light- to heavy-weight materials.

With its newly designed thread take-up and shuttle hook, the machine reduces irregular stitches and provides consistent thread tension.
The feeding frame and the intermediate presser have been improved to provide a higher pressure on the material. By securely clamping the material, they ensure consistent-quality seams free from uneven material feed.
The stroke of the intermediate presser can be adjusted steplessly in the range of 0.5 to 10mm. This gives the machine the capability to easily handle processes in which multi-layer portions of the material are sewn.
The lower dead point of the intermediate presser can be easily adjusted to suit the material thickness simply by turning a knob on the controls.
The range of materials that can be sewn is further widened.

The machine's improved capabilities include the ability to sew a wider and more flexible range of thread number counts. This allows the machine to sew various kinds of heavy-weight materials.

* The table given above should be used as a guide. The thread number counts corresponding to the respective material weights depend on sewing conditions given.
Highly reliable thread trimming mechanism cuts the thread without fail.

Intermediate presser adjustment knob

Productivity is further increased.

High-sped performance of 2,500rpm (When the stitch length is set to 3mm)
Both the jump speed and thread-trimming speed have been increased to reduce the cycle time.
(Example) Label attachment
(stitch length: 4mm, label size: 60mm(L) x 100mm(W))
  AMS-210D Conventional
Sewing time 3.4 sec. 4.8 sec.
The frequency of bobbin replacement has been reduced.

The machine is equipped as standard with a double-capacity shuttle hook. This hook is especially useful for performing sewing with thick thread.
The ample lift of the feeding frame facilitates material-setting on the machine.
The lift of the feeding frame is now as high as 30mm (for pneumatic feeding frame). Furthermore, the lift of the intermediate presser has also been significantly increased, and now extends to 20mm. With these increased lifts, the material to be sewn can be easily placed on the machines.
Direct-drive mechanism achieves outstanding responsiveness.
The machine incorporates a direct-drive mechanism that connects a compact AC servo motor directly to the main shaft.
This transmits motor revolutions to the main shaft with no loss, thereby improving the machine's responsiveness to the motor.
The needlebar can be stoppeed at its upper dead point.
The function of stopping the needlebar at its upper dead point enable the needlebar to stop at a higher position. With this function, a heavy-weight material can be placed on the machine with ease.
The reduced vibration and noise contribute to a more convenient working environment.
With its hook-driving shaft mechanism and direct-drive mechanism, the machine no longer needs a belt. This helps achieve both higher-speed performance and lower vibration and noise.


Model name AMS-210D AMS-210D <P TYPE>
Sewing area 60mm(L) x 130mm(W)
Application Standard For heavy-weight materials Standard For heavy-weight materials
Max. sewing speed 2,500rpm (when stitch length is set to 3mm)
2,300rpm (when stitch length is set to 4mm)
Stitch length 0.1~12.7mm
Needle bar stroke 41.2mm
Lift of the feeding frame Max. 25mm, Pneumatic: Max. 30mm
Lift of the intermediate presser Max. 20mm
Stroke of intermediate presser Standard 4mm (0.5mm~10mm)
Needle (at the time of delivery) DP x 5(#14)
For JE: 134 (Nm100)
DP x 17(#18)
For JE: 135 x 17(Nm110)
DP x 5(#14)
For JE: 134 (Nm100)
DP x 17(#18)
For JE: 135 x 17(Nm110)
Thread #80~#20
Hook Double-capacity shuttle hook DP double-capacity shuttle hook
Input function Provided as standard
Memory medium 2DD/2HD 3.5" micro-floppy disk
Number of stitches that can be stored in memory Max. 360,000 stitches (max. 20,000 stitches/pattern)
Number of patterns that can be input Max. 691 patterns (2DD) / 999 patterns (2HD)
Enlarging / Reducing facility 1~400% (by increasing/decreasing the stitch length or the number of stitches)
Error detector function Needle thread breakage detector, temporary stop (pause) switch, error code indicating function
Bobbin thread counter Provided as standard
Sewing machine motor 400W compact AC servomotor (direct-drive system)
Power consumption Single-phase, 3-phase 600VA
Lubrication Automatic
Lubricating oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Total weight 120kg
Dimensions 710mm(L) x 1,200mm(W) x 1,200mm(H)

Adobe Acrobat Reader is required to view .pdf files. get Adobe Acrobat


back to main JUKI page

© copyright 2003 Arch Sewing Company