  |
 |
 |
Click
on the model below to view product information. |
back to main us blindstich page
| MEN'S
WEAR, TROUSERS AND BELT LOOP SERIES |
 |
U.S.
MODEL 1099-BL
An outstanding Belt Loop Machine with US Automatic Trimming
Device that TRIMS AND SEWS IN ONE OPERATION. Strips are automatically
cut to fit the folder, which makes a double fold without a raw
or raveled edge. Utilizes top feed for easier feeding of material
through folder. Available in standard sizes: 5/16", 7/16",
3/8" and special 1/2" finish. Folder sizes are not
interchangeable. When ordering any of the above sizes, the machine
is shipped with two folder openings in the size ordered, except
on wide loops. Folder openings are: A - for light material;
B - for medium, C - for heavy material. Front feed and interlining
attachment are optional. |
 |
U.S. MODEL 99-BLP-1
Same as 1099-BL except without front cutter.
Material must be pre-cut for folder. Available in REGULAR SIZE
LOOPS of 5/16", 7/16", 3/8" and special 1/2"
finish. WIDE LOOP folders available in 5/8", 9/16",
3/4" and 7/8". Only one folder size shipped with wide
loops. Folders are interchangeable. When ordering any of the
above sizes, the machine is shipped with two folder openings
in the size ordered, except on wide loops. Folder openings are:
A - for light material; B - for medium, C - for heavy material.
Front feed and interlining attachment are optional. |
return to top
| SACK
AND SPORT COAT/LAPEL PADDING |
 |
U.S.
MODEL 1099-LP-1
A general utility machine for padding collars and lapels on
sack coats of lightweight material. Exclusively designed for
synthetics, wash and wear and tropicals.
|
| |
U.S. MODEL 1099-LP
For padding heavy sack coats, top coats and
overcoats. Padding collars and lapels. Edge tape felling. Turn-up
of coat bottoms and tacking canvas pockets. Optional-Foot lifter
available on request for above models. |
return to top
Designed to overcome the problem of knits, worsteds and a vast variety
of man-made fibers which are difficult to blind stitch. Fells with
an overcast stitch that prevents raveling, tucks all loose threads
under fells at the same time. Recommended for cuffless trousers.
 |
U.S.
MODEL 1099-PWB
Designed for medium to heavy weight trousers particularly where
seams are heavy. Features yielding rib. Single turn cuffs.
|
| |
U.S. MODEL 1099-PWB-1
For bulky safety stitch seams, lap seams,
overlock, single turn, difficult turned under type cuffs and
heavy work material. Recommended for denim. |
| |
U.S. MODEL 1099-PB-1
The most successful cuff felling machine
for men's trousers, both cuffs and cuffless. Ideal for knits
and woven materials. Gives a hand tailored appearance. |
| |
U.S. MODEL 1099-PBT
Dual purpose for formalwear alterations on
trouser cuffs and the new telescopic sleeve felling application.
Increases the life of rental garments. |
| |
Also available 1099-PB
for Raw Edge Trouser Fellings. |
return to top
| SACK
AND SPORT COAT/BOOK SEAM FELLING |
 |
U.S.
MODEL 1099-BS
Gives the exact size desired without deviation. Guarantees the
positive size of the fold. The only machine that starts at the
beginning of the edge. Works on all fabrics including Indian
Madras and all man made fibers. Standard size for seams and
backs, 1/4" and 3/16". For bottoms, 3/8". |
| |
U.S. MODEL 1099-BT
For booking and inserting fusing strip at
the same time on coat bottoms, while eliminating costly lockstitch
application. Books 3/8", inserts 1/2" or 5/8"
fusing strip.Excellent on knits. |
return to top
| TROUSERS/FELLING
CURTAINS SACK, SPORT COATS/BOOKING AND TACKING |
|
U.S.
MODEL 1099-WB
For DRESS TROUSERS features yielding rib. This modern chain
stitch machine is extremely simple to operate. The stitch has
far greater elasticity - will never break; gives fine smooth
finish to waistband, stitches over pockets without penetrating
or skipping a stitch. |
| |
U.S. MODEL 1099-WB-1
For slacks and trousers of light to medium
weight knits and woven material. |
U.S. MODEL 1099-T
Designed for face tacking operations. Models
available for General, Light, and Heavy work. Compensating rib
pockets, flaps, sleeves, etc. |
U.S. MODEL 1099-T-1
For heavy face tacking on uniforms and more.
Especially suited for custom tailors, lapel padding and cuff
felling. |
return to top
| SACK
AND SPORT COAT/SLEEVE LINING FELLING |
 |
U.S.
MODEL 1099-SF-HD
A new breakthrough on cutting cost on sleeve lining felling.
Simple to operate and maintain. Reverse needle eliminates costly
lockstitch operation. Feed lining evenly. Fine overcast single
thread chain stitch gives full elasticity.
es fine smooth finish to waistband, stitches over pockets without
penetrating or skipping a stitch. |
return to top
|
|
